10inch_motors-group

10-Inch Rewindable

These 10-inch rewindable motors, manufactured in ISO 9001 certified facilities, are built for dependable operation in 10-inch diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The motor is filled with a special FES93 fluid, providing frost protection down to -15 °C storage temperture. A special diaphragm ensures pressure compensation inside the motor. The SAND FIGHTER™ SiC seal system is standard. For applications in aggressive media, motors made of 316SS and 904L are available.

Specifications:

  • Easy to assemble with double flange
  • Cable material according to drinking water regulations (VDE/ACS/KTW approved)
  • SAND FIGHTER™ SiC seal system for high performance in sand
  • High efficiency electrical design for low operation cost
  • All motors prefilled and 100% tested
  • Maximum storage temperature -15 °C to +60 °C
  • Designed for retrofitable Pt100 sensor
  • Non contaminating FES93 filled design
  • Standard Water Well construction have cast iron end frames epoxy coated and 316SS stator shell

Technical Specifications:

  • 85 to 185 kW
  • 10" flange
  • Potection: IP68
  • Starts per hour: max. 10
  • Installation position: vertical/horizontal (185 kW motors may not be installed horizontally!!)
  • Motor lead in 6 metres (KTW approved)
  • Standard volatges: 380-415 V/50Hz, 460 V/60 Hz
  • Voltage tolerance 50 Hz: -10% / +6% UN 380-415V = (380-10%) - (415V+6%)
  • Voltage tolerance 60 Hz: ±10% UN
  • Motor protection: Select thermal overloads according to DIN 61947-4-1, trip class 10 or 10A, trip time <10s at 5 x IN
  • Standard motor with PVC winding insulation for max.ambient temperature of 25°C with a min. cooling flow: v = 0.5 m/s

Options:

  • 1,000 V, 2,300 V and 3,300 V 50 Hz DOL motors for high voltages are available for Standard, 316SS and 904L constructions.
  • Wye/Star Delta start (pos. of cable 90°)
  • Motors in complete 316SS and 904L constructions
  • PE2/PA winding insulation for max. ambient temp. of 45°C at the same cooling conditions as standard PVC
  • Pt100 temperature sensor (sold separately)
  • Lead in different lengths up to 50 metres

Standard Water Well; SandFighter; DOL (3 lead)

kW HP Model Number # Leads Materials Performance Curve
85 115 2641315111 DOL 300SS 380 400 415
110 150 2631335111 DOL 300SS 380 400 415
130 175 2641345111 DOL 300SS 380 400 415

Standard Water Well; SandFighter; Star (Wye) Delta (6 lead)

kW HP Model Number # Leads Materials Performance Curve
85 115 2642315111 YD 300SS 380 400 415
110 150 2632335111 YD 300SS 380 400 415
130 175 2642345111 YD 300SS 380 400 415
150 200 2642355111 YD 300SS 380 400 415
185 250 2642365111 YD 300SS 380 400 415

316SS; SandFighter; DOL (3Lead)

kW HP Model Number # Leads Materials Performance Curve
85 115 2641316111 DOL 316SS 380 400 415
110 150 2631336111 DOL 316SS 380 400 415
130 175 2641346111 DOL 316SS 380 400 415

316SS; SandFighter; Star(Wye) Delta (6 lead)

kW HP Model Number # Leads Materials Performance Curve
85 115 2642316111 YD 316SS 380 400 415
110 150 2632336111 YD 316SS 380 400 415
130 175 2642346111 YD 316SS 380 400 415
150 200 2642356111 YD 316SS 380 400 415
185 250 2642366111 YD 3164SS 380 400 415

904L Stainless Steel; SandFighter; DOL (3Lead)

kW HP Model Number # Leads Materials Performance Curve
85 115 2641317111 DOL 904L 380 400 415
110 150 2631337111 DOL 904L 380 400 415
130 175 2641347111 DOL 904L 380 400 415

904L Stainless Steel; SandFighter; Star(Wye) Delta (6 lead)

kW HP Model Number # Leads Materials Performance Curve
85 115 2642317111 YD 904L 380 400 415
110 150 2632337111 YD 904L 380 400 415
130 175 2642347111 YD 904L 380 400 415
150 200 2642357111 YD 904L 380 400 415
185 250 2642367111 YD 904L 380 400 415

10-inch-rew-lead.jpg

10-Inch Rewindable Motors - DOL Motor Leads*

Lead kW Ø [mm2] B / H [mm] Lengths [m] Qyt. Lead Mod.- Nr. Lead seal
Mod.- Nr.
Kit 304 / 316
Lead Seal
Mod.- Nr.
Kit 904L
Figure 1 85 4G25 B 44,3 6 1 308 710 116 308 660 720 308 660 724
H 14,5
110 - 130 4G35 B 48,5 6 1 308 710 117 308 660 721 308 660 725
H 16,5
Figure 2 130 - 150 (PE2/PA) 3X50 B 46,5 6 1 308 710 113 308 660 712 308 660 726
H 19,5

 

Ground lead

Ground Lead
(optional)
kW Ø mm2 D [mm] Lengths m St. Mod.-Nr.
Figure 3 - 1G25 13,0 8 1 308 053 080

 

10-Inch Rewindable Motors - YD Motor Leads*

 

Lead kW Ø [mm2] B / H [mm] Lengths [m] Qyt. Lead Mod.- Nr. Lead seal
Mod.- Nr.
Kit 304 / 316
Lead Seal
Mod.- Nr.
Kit 904L
Figure 1,
Figure 2
85 3X16 B 28,8 6 1 308 710 118 308 660 722 308 660 727
H 12,2
4G16 B 38,0 1
H 12,8
110 - 150 3X25 B 37,5 6 1 308 710 114 308 660 713 308 660 728
H 16
4G25 B 44,3 1
H 14,5
185 4G35 B 48,5 6 1 308 710 121 308 660 723 308 660 729
H 16,5
3X35 B 38,5 1
H 16,5

Lead Opening Seal Kit

Lead opening seal kit 85 - 185 kW DOL / Y∆ 304 / 316 308 660 715
904L 308 660 730

 

For PE2/PA motors, additional special tape 700 541 688 is necessary

Caution: Lead assemblies on submersible motors are suitable only for use in water and may overheat and cause failure if operated in air. For air operation, consult Franklin Electric